Madewell Boxy Tee Knock-off

Sooooo I was lurking around the Madewell site the other day cause I like to pretend that I'm a 6 foot boho chic kind of girl.  The kind who has lobster bakes on the beach and thinks casual games of volley ball are great fun. Of course the reality is that I'm 5' 6" and way to curvy to look anything but frumpy in the baggy unstructured styles. Volley ball is my mortal enemy and I don't much care for the beach. "The sunlight, it burrrrrnssss! Where is a grotto where I can lay on a cold rock?"  But I will take any lobsters you have on hand and a giant mug of melted butter. Get into my belly undersea creatures!

Now where were we? Oh yes, talking about the Madewell site.  I had one of those, "Pfffft, I can make that," moments upon seeing this knit linen T-shirt.  My normal MO is to think that, pinterest it and then do nothing about it for a year.  But this time being desperate for some tops that fit, I got out the Lady Skater pattern and made it happen. 

The Lady Skater pattern you say? Are you in some sort of secret contest to hack Kitschy Coo patterns as many times as possible?  Weeeeell, let's just say Froggie and I have a little side beating action going on in that department.  Even so, using the Lady Skater seemed practical since it has the exact neckline needed for the top.  All a girl had to do was play around with proportions.

For my first go at the T-shirt I decided to trace the Lady Skater pattern 2 sizes larger than the recommended size.  The bodice was then lengthened, with a little checking against the Trifecta top, and I decided on about 2" of ease around the hip.  The Madewell garment looks more roomy at that area, or else it's just that the models have no hips.  I've found for my figure just a little bit of of ease in that location is best.

What did I get?  A proper over sized 80's T-shirt. I just needed some gathered yoke jeans to tuck it into.  *Side note -Is anyone else completely horrified that gathered yoke pants are coming back into Vogue? I want to yell at the young kids, "Don't do it, learn from your elders who made that mistake!"*  So as I was staring at my 80's T-shirt in the mirror it dawned on me that the neckline area was fine.  The problem was with the sleeves being too long/baggy.  I went back to the drawing board and retraced the armhole area/sleeves in my recommended size.  The rest of the shirt was left over sized and I mocked up another muslin. Guess what? It was perfect! 

I've broken out the hacking steps below, so you don't have to read all my drivel while you hack. The steps are exactly the same for the front and back pieces so I've only shown the front.

Hacking Steps

1. Trace Lady Skater neckline/shoulder and neckband two sizes larger than your regular size.

2. Trace armhole and sleeve in your recommended size.  I added an extra 1" of length to the sleeve so it could be hemmed instead of attaching the sleeve band.

3. Extend the CF/CB line down to the length you want the shirt to be. I used the trifecta top pattern as a guide for my length, but you could use any T-shirt you like.

4. From your desired hem length, square out a horizontal line from the CF/CB.  The length of the line should be 1/4" of your hip circumference plus the amount of ease you desire.  On my shirt I wanted about 2" of ease at the hip for my 40" hip circumference.  Both my front and back pattern pieces have a 10.5" hemline.

5. For the side seam connect the hemline and bottom of the armhole with a diagonal line.

6. You can leave the hemline straight or go back and slightly curve it up a the side seam area.

7. Finished pocket dimensions are  4.5" wide and 5" long.  Draw a rectangle that size and add about an 1.5" to the top of the pocket so that it can be folded over and stitched. Add a narrower seam allowance to the other edges of the pocket.

Construct as you would any knit T-shirt, though I would recommend sewing the pocket on first thing.  It's a lot easier to do on a flat piece of fabric. I used my sewing machine with a little longer than normal stitch length to attach the pocket. All other seams were serged and the hems were coverstitched.

You will want to make up this style in a knit that has some drape.  My shirt is made out of a 2 ply rayon knit, it has good cross wise stretch but limited length wise stretch.   If you'd like to try a linen knit, like the original shirt, then you can pick up some yardage at Marcy Tilton, Emmaonesock and Mood Fabrics. Scroll around and look for "knit" in the description since these are grouped with the normal woven linen fabrics.

As always, happy hacking my dears.  In the meantime I'll be in my evil lair thinking of more ways to cut up patterns. Muhaaaaa!

Ahoy, Ahoy! It's a Nautical Lad

Hey there folks, I'm in a bit of a knit garment extravaganza......or maybe I'm just trying to pad out my stash busting numbers. What ever the case, cat boy does need a few summer clothes even if he prefers to run around naked.  Put on some clothing  boy, you can be a nudest when you have your own place!

First up Peek-a-boo Summer PJ's. Oddly I didn't own this pattern yet, despite my torrid love affair with the winter PJ set.  Guess last summer I ran the gantlet at Carters instead of sewing them myself.  That mistake won't happen again while there is Lillestoff lurking in the stash.  OK fine, I bought this print in February with the sugar skulls sweatshirting. It's wrong not to pad a Kitschy Coo order, the voices in my head told me so.

Anyhow back to PJ's, the summer variety is just as easy to sew as the winter ones. A slight mod was made to the sleeves and shorts because I didn't want to finish them with ribbing.  I added 1/2" of length to the sleeve hem/shorts hem area for a standard hem.  This worked fine for the shorts, but the sleeve length still looked a little too short for my taste.  Why I didn't listen to my gut which told me this before cutting the fabric? Because I'm stubborn, that's why.  There was plenty of ribbing in the stash so I added it to the sleeves as instructed and decided it looked fine.

Other than my own sleeve length preferences, I've got no complaint about the Summer PJ set. Love me some Peek-a-boo patterns. Now if only that rascally boy will stop demanding he wear dragon PJ's long enough for photos.

After finishing the PJ's I still had a 1/2 yard of fabric left over, sweet! Might as well take advantage of the serger and coverstitch already being threaded with red and make the Fishsticks Patrick curved raglan. I'd bought this one a long time ago to sew for Christmas presents and never put it together.  Mostly cause it was the year of sewing coats for my niece and nephew and time ran out.  I was still interested in trying this pattern because of the curved raglan shape.  Good to have a little variety in your boy's raglan collection, so I whipped one up with some red jersey for contrast. Luckily for the blog my baking assistant was in the mood to do some modeling work during his shift today.

The pattern has a two piece long sleeve, so for warm weather I used the upper sleeve pattern and drafted my own hem band.  The band is the same 2.5" width as the neckband and 1/2" shorter than the sleeve hem width. That worked nicely in the same ribbing as the neckband.

Soooooo I did a classic Heather and looked up the seam allowance after finishing the shirt. Sigh, I used to be such a reader.  Turns out it had a 1/2" seam allowance which I probably would have cut down.  With much trepidation I put this on Master D to find it fit just fine. Chunky toddler for the win! Can't make skinny pants for him, but he saved me plenty seam ripping this week.  Good job boy, you can clang the measuring spoons all you want.

I made a couple knit tops for myself, but those will have to wait another day.  Too busy stuffing blueberry muffins in my mouth to take pictures. Nom, Nom, Nom.

How to Draft a Bodice with a Diagonal Princess Line

Hi everybody, it's time to put on your learning caps cause pattern drafting class is about to start. Today's lesson is how to draft a bodice with diagonal princess line seams. This drafting is a little bit more advanced than some of the pattern hacks I've blogged about in the in the past. Don't worry though because it's quite logical and we'll go through it step by step.

I mentioned in the teacups dress post that the Emery bodice was used as a base for this draft. I chose Emery because the bodice very close to a bodice sloper. You could use any bodice pattern that is similar. It should have a waist and side seam darts on the front, a waist dart on the back and have a neckline on the shallow side. Colette's Peony would be another good example, as would be the Big 4's fitting shell patterns. In this tutorial I will be using a copy of the Emery bodice with all seam allowances removed.  I highly recommend doing this for two reasons.  One, you don't have to remember what edges already have seam allowance and what edges need it added.  Two, there is no confusion when marking measurements, they all fall on the seam line. I know some of you hate adding seam allowance to patterns, but in this case it will make your life a lot simpler.  OK, besides a traced copy of your bodice you'll need, scissors, tape, pen/pencil, a straight ruler, a french curve and if you have one a hip curve.

 If you don't own a hip curve ruler than you can get by with a french curve.  Let's begin.

Front Bodice
1. Unless your bodice was drafted to be sleeveless you'll need to raise the armhole. Since no sleeve will be attached you need less ease and most of us prefer having bra coverage. On Emery I raised the armhole 5/8" and redrew the armhole with my french curve.

2. For the rest of the steps the bodice will need to be cut out.  Go ahead and cut it out along the seam lines if you haven't already.

3. Next step is to narrow the strap area. On my dress I made the straps 2" wide.  Measure this from the neckline side and mark.

Use the french curve to redraw the armhole to meet the new mark.

Then cut off the excess paper.

3. Now we are going to rotate the side seam dart into the waist dart. To start, measure the dart intakes at the outside edge and mark. Use those marks to draw a line through the center of the dart and out through the tip. Do this on both darts and extend the lines so they meet. This will mark the bust apex.

Cut along the bottom outside leg of the side seam dart, up the line to where it bisects the waist dart.

Cut along the left outside leg of the waist dart, up the line to where it bisects.

You are going to "close" the side seam dart. To do this pivot the cut out bodice piece until the bottom side seam dart leg meets the top leg. Tape the pattern there.

There will be a little overlap at the tip of the dart, that's fine as it's a small amount of ease eliminated.  Also don't bother filling the gap in the new larger waist dart. We will be closing that dart in a later step.

4. Let's get the new neckline drawn in before chopping up the bodice further.  I'll be using a hip curve to draw the neckline and the style lines. This ruler has a very shallow curve to it, which allows me to give the seams a slight curve.  If using a french curve, use the flatter tail end and you may need to reposition it to draw the entire line. OK, back the neckline, using your straight ruler mark how far down you want it to be on the CF.  The depth of the V is a matter of personal choice, mine was about 4.5" down from the original neckline. Use the hip curve/french curve to draw a new neckline from the CF mark up to inside edge of the strap.

Then cut off the excess paper and your neckline is done.

5. Time for the first diagonal princess line. The position of this seam line matters because it will cross over the bust apex, thereby providing the bust shaping for the bodice.  The other seam line is just eye candy and could be drawn in any location. The most important thing about drawing this seam line is that it touches the bust apex/line intersection point. You want to do that and keep the seam line mostly parallel to the neckline curve. I've laid my hip curve on the bust apex and let it dictate where the seam line falls on the armhole and CF.

You can tweak the armhole/CF positions a little if you want a curvier seam line. Just keep the middle on the bust apex.  If you like to have notches on this seam, then mark some hashes on the line now. Once the seam line shape is to your liking then cut the bodice apart on it.

6. Now that the top part of the bodice has been removed we can close the waist dart. Pivot the right hand side of the bodice until the two waist dart legs meet. There will be a little gap at the top of the dart, that's just a little extra bust ease for the pattern. Tape the dart closed.

7. Time to draw the second seam line. As I said before it's location is not important to the fit, you can put the seam line where ever it's aesthetically pleasing.  Mine starts 1" below the armhole and ends 1" above the bottom of the CF. Add notches now if you want them.

When that shape and location looks good then cut the bodice apart on the line.

8. The draft of the front bodice is all finished. Label those pieces top, middle and bottom before they get away.

Back Bodice
1. The back bodice draft is very similar to the front but we'll go through it step by step.  Start by raising the back armhole the same amount as the front, 5/8" in my example.

 Then cut out the bodice on the seam lines.

2. Shoulder strap area - Emery does not have a shoulder dart, but if you are using a different pattern there might be one in that location. If you do have a shoulder dart, then rotate it into the waist dart. Draw a line to connect the two dart points and cut long the outside legs. Close the shoulder dart just like you did with the side seam dart on the front. Once the dart is removed the shoulder strap area can be narrowed to match the front.
If using Emery just start with this step.  Measure 2" from the neckline side and draw a new armhole edge.

Then cut off the excess paper.

3. Since our design has a back V-neck we are going to cut off the back neckline dart instead of rotating it anywhere.  On the CB make a mark where you would like the point of the V neck to land.  I put mine at 6.5" down from the original neckline.  Use the hip curve/french curve to draw the new neckline. 

 Then cut off the excess.

4.  Next we are going to draw in the upper seam line on the back bodice.  Grab the upper front piece of the bodice and lay it on top of the back.  Make a mark on the back armhole so that the seam line is drawn in the same location as the front.

Take the hip curve, put it on the armhole mark and on the tip of the back dart.  Like on the front you want to keep it as close to parallel to the neckline as possible. Draw the new seam line in and add any notches if you want them.  

Once the seam line shape is to your liking then cut the bodice apart on it.

5. Time to close the back waist dart. Cut the dart along the dart leg all the way up to the seam line cut.

Pivot the bodice till the two dart legs touch and the dart is closed. Tape down the bodice in it's new location.

6. Now that the dart is closed we can draw the final seam line.  The two lower seam lines need to meet in the same location on the side seam. Make a mark on the back side seam in the same location as you did on the front.  For my example that is 1".  

I also made the CB mark at 1" from the bottom just like on the front.  Use the hip curve/french curve to draw in the new seam line.

Add in notches if you wish and cut the bodice apart on the line.

7. Back bodice draft is now finished.  Label your pieces again so that you can tell them apart from the front.

Now that all the drafting is done you can add seam allowance to your pieces. You can either tape the cut pieces of the bodice to a block of paper and add seam allowances to that.  Or trace the cut pieces onto a new piece of paper and add seam allowance to the new copy.  Here's a look at my actual pattern pieces, I did the trace method.

You can add 5/8" seam allowance to all the edges like commercial patterns or vary the seam allowance if you prefer.  I've make the diagonal bodice seam lines 3/8" and the rest of the seams 5/8".

As always I strongly encourage sewing a muslin before cutting into your good fabric.  Save the fabric, make a muslin!  I don't want any accidental wadders on my conscious.  Hopefully this tutorial is fairly clear, but if you have any questions feel free to leave them in the comments.  Happy Drafting Everyone!